Electrical Requirements

MGC Power Requirements

The MGC's external power supply has a maximum output of 150 Watts and provides power to the MGC and its powered peripherals.

Range	Nominal Vrms	Minimum Vrms	Maximum Vrms	Input Current Max. Arms
LOW (115)	100-127	90	136	2.2A
HIGH (230)	200-240	180	265	1.2A

Caution:  Locate the power supply away from other electrical equipment, away from heat sources, away from possible liquid spills, and where there is adequate clearance for cooling.

Note:  The MGC does not offer an AC convenience outlet for CRT power. A separate country-specific power cord must be ordered separately. Available NCR power cords are described in the System Cables section.

Peripheral Power Requirements

The number of peripherals that the MGC can support is dependent upon which peripherals are connected. For planning purposes, use the RealPOS 10 Mobile Gateway Controller Release 1.0 Power Matrix (B005-0000-2296) for details on total power distribution.

Note:  This file requires Microsoft Excel to run.

AC Store Wiring Requirements

The customer must provide suitable AC power for the MGCs, associated equipment, and devices. We recommend a dedicated unswitched power line dedicated to the NCR equipment installation. Refer to the NCR Workstation and Peripheral AC Wiring Guide (BST0-2115-53) for store AC wiring requirements. The AC outlet must be installed near the MGC and easily accessible to the operator.